Operation Manual

Fragile dishes
A number of household goods are not suitable for
machine washing. This can be due to a variety of
reasons. Certain materials cannot withstand intense
heat; others can be damaged by the dishwasher
detergent.
Fragile decoration
China with decoration on top of the glaze (the
goods have a rough feel) should not be machine
washed.
Crystal/ glass
Place the goods so that they do not knock together
during the wash. Use the lowest possible wash
temperature and the shortest possible program.
Do not heat dry! Antique and very fragile items
should not be machine washed.
Glass which is machine washed at high temperatures
can in time develop a grey film which cannot be
removed. Wash fine glass at the lowest
temperature and with a low dosage of dishwasher
detergent.
Silver
Silver and stainless steel items should not come into
contact with each other as the silver can discolor.
Cutlery with glued handles
Certain types of adhesive cannot withstand machine
washing. In such cases the handles can come loose.
Wood
Wooden items should only be machine washed if
they are labeled as dishwasher safe.
Aluminum
Aluminum can be dulled by machine washing.
However, good quality aluminum saucepans can be
machine washed, although a reduction in luster
should be expected.
Plastic
Certain types of plastic cannot withstand the high
temperature generated in machine dishwashing.
Protect plastic goods
Select a program with a low temperature.
Time remaining
When you have selected programme and option,
the display shows the length of time the programme
had taken the last time it was used. When you have
start the machine, the display window shows how
much of the programme time remains.
This time can vary a little from one occasion to
another depending on the temperature of the inlet
water, the amount of dishes, the ambient
temperature, etc.
During the time the programme is operating, the
time is counted down and the remaining
programme time is shown in the window. The
remaining time is shown e.g. as 1:02, which means
that 1 hour and 2 minutes of the programme
remain.
NB!
During the first run of each programme, the
remaining time display may be slightly misleading as
the machine is estimating the time remainimng.
If the programme takes longer than expected, it
displays 1 minute until the programme is completed.
Status light
The status light at the bottom on the machine
provides information by means of 3 different
colours.
Indications
Blue
- indicates that the program has started and it is
still possible to load more dishes
Red
- indicates that there is detergent in the machine
and it is not recommended to load more dishes
(risk of poor dishwashing result)
Flashing Red
- indicates one of the following faults:
- water inlet fault
- leaking valve
- too much water in the machine
- clogged filter
Green
- indicates the program has finished (lit for 2
hours)
See Fault indications and Trouble shooting
Indications
15