Operation Manual

17
4. You can release and turn the pump blade by
inserting your finger into the hole and release
anything blocking it.
5. Reinstall the fitted piece and filters.
6. Plug the plug into the wall socket.
If the machine still does not start and a buzzing
sound is heard, the overflow guard has been
activated.
• Shut off the water.
• Pull the plug out from the wall socket.
• Call the service division.
NOTE!
Do not forget to reinstall the fitted piece.
The spray arms
Lower spray arm
Holes and bearings can sometimes become
blocked.
1. Pull the lower washer arm straight up to release
it.
2. Remove any deposits using a needle or similar.
The washer arms also have holes underneath.
Upper spray arm
To release the upper spray arm, the upper basket
must be removed.
1. Pull out the basket.
2. Remove the upper spray arm by unscrewing it
counter-clockwise from the basket and clean it.
3. Screw the spray arm back into place.
Middle basket
Cleaning the middle basket:
1. Pull out the basket.
2. Check the holes in the spray unit.
3. Clean with a pin or similar item.
Fit the cover securely if you are not using the wire
basket.
Door
When cleaning the edge around the door, use only
a slightly damp cloth, possibly with a little
detergent. Do not use a spray bottle or similar
around the door catch. This is to ensure that water
does not penetrate into the door catch and come
into contact with the electrical components.
CAUTION!
Do not use a spray bottle or similar around the
door catch.
Spray arm
Wire basket
Utensil basket
Spray pipe
Cover