Operation Manual

23
Installation instructions
FULLY INTEGRATED MODELS
SAFETY INSTRUCTIONS:
1. It is important that you closely follow the
instructions provided here.
2. An incorrect or defective installation can lead to
higher consumption of energy, water and
dishwashing detergent, which can lead to higher
costs and poorer cleaning results.
3. Plumbing and electrical installations must be
carried out by qualified professionals.
4. Exercise caution during the installation! Wear
protective gloves! Always work in pairs!
5. The power socket must be fitted outside the
cavity for the dishwasher to enable easy access
after installing the machine.
6. Always follow the applicable regulations for
water, drain and electrical connection.
7. A dishwasher fitted with a wired plug must be
connected to an earthed socket.
CAUTION!
Turn off the water supply when installing the
dishwasher!
BEFORE STARTING THE INSTALLATION:
1. Connection to water supply:
• There must be a shut off valve on the water
supply pipe. The shut off valve should be
installed in a location that is easily accessible
so that the water may be shut off in the event
that the dishwasher needs to be moved.
2. Installation advice:
• Cable holes for wires/cables need not be
larger than 40 mm.
• Affix the light shielding film (see Fitting the
dishwasher in place). Not all models.
• Place a watertight protective tray on the floor
under the dishwasher to prevent any water
leakage.
Note:
Check that the fitting and connection
measurements are correct.
See Installation and connection information.