Operation Manual

1. Attach the supplied sound insulation material to

the back of the kickboard (certain models only).

If you use the low kickboard, adjust the height

of the insulation material by removing the thin

strip.

2. Loosen the holders for the kickboard by moving

the grey catches to the side.

3. Adjust the holders (pull out or push in) until

they are on a level with the surrounding kitchen

plinth.

4. Lock the holders in place by pushing each catch

into a suitable notch in the holder.

5. Hang the toe kick on the holders.

6. Check that the toe kick is in line with the

surrounding kitchen toe kick, that is, at the

same depth. Loosen and adjust the holders as

necessary until satisfied.

Step 8. Adjustment of Status light

Adjust the height of the insulation material