Installation Guide

4
INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Gather the recommended tools and parts before starting
installation. Read and follow the instructions provided with
any tools listed here.
All Installations
Tools Needed:
Pliers Flat-blade screwdriver
Phillips screwdriver Utility knife
5
/
16
" and
1
/
4
" nut drivers or
hex sockets
Small level
Measuring tape or ruler
5
/
8
" open-end wrench
10" adjustable wrench that
opens to 1
1
/
8
" (29 mm)
Torx
®†
T20
®
and, if installing
custom front panels, Torx
®
T15
®
screwdrivers
Other Useful Items You May Need:
Flashlight Shallow pan
Bath towel Masking or duct tape
Parts Supplied:
Drain hose clamps (2)
(1 large/red and 1 small/green)
Drain hose
#10 x
1
/
2
" Phillips-head
screws (2)
Undercounter mounting
brackets (2)
Make sure all these parts are included in the literature package.
If parts are not included, call us at our toll-free number or visit
our website listed in the User Guide.
Door handle (on some models)
†
®
TORX, T15, and T20 are registred trademarks of Acument Intellectual Properties, LLC.