Installation Guide

14
Electrical Connection — U.S.A. Only
30" (76.2 cm) and 36" (91.4 cm) Models
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use a new 40 amp power supply cord.
Plug into a grounded outlet.
Failure to follow these instructions can result in death,
fire, or electrical shock.
1. Disconnect power.
2. Remove the terminal block cover screws and disengage
mounting tabs to remove terminal block cover from back
of range.
A
B
C
A. Phillips head screws
B. Terminal block cover
C. 2 mounting tabs at bottom
3. Add power supply cord strain relief.
■ Assemble a UL listed strain relief in the opening.
A
A. UL listed strain relief
48" (121.9 cm) Models
■ Tighten strain relief screw against the power
supply cord.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use a new 50 amp power supply cord.
Plug into a grounded outlet.
Failure to follow these instructions can result in death,
fire, or electrical shock.
4. Complete installation following instructions for your type
of electrical connection:
4-wire (recommended)
3-wire (if 4-wire is not available)
If your home has:
And you will be
connecting to: Go to section:
4-wire receptacle
(NEMA type 14-50R)
A UL listed,
250-volt
minimum,
40- or 50-amp,
range power
supply cord
4-wire
connection:
power supply
cord
3-wire receptacle
(NEMA type 10-50R
A UL listed,
250-volt
minimum,
40- or 50-amp,
range power
supply cord
3-wire
connection:
power supply
cord
Electrical Connection Options