Setup and user guide

12
Loading the racks
Before loading the baskets, remove all food residues from the crockery and empty the glasses. You do not
need to rinse beforehand under running water.
Arrange the crockery so that it is held in place firmly and does not tip over; and arrange the containers with
the openings facing downwards and the concave/convex parts placed obliquely, thus allowing the water to
reach every surface and flow freely.
Warning: lids, handles, trays and frying pans do not prevent the sprayer arms from rotating.
Place any small items in the cutlery basket.
Very soiled dishes and pans should be placed in the lower basket because in this sector the water sprays are
stronger and allow a higher washing performance.
After loading the appliance, make sure that the sprayer arms can rotate freely.
UPPER RACK
Load delicate and light dishes: glasses, cups, saucers,
low salad bowls.
The upper rack has tip-up supports which can be used
in a vertical position when arranging tea/ dessert sau-
cers or in a lower position to load bowls and food
containers.
(loading example for the upper rack)
ADJUSTING THE HEIGHT OF THE UPPER RACK
The height of the upper rack can be adjusted: high
position to place bulky crockery in the lower basket
and low position to make the most of the tip-up sup-
ports by creating more space upwards and avoid col-
lision with the items loaded into lower rack.
The upper rack is equipped with a Upper Rack height
adjuster (see figure), without pressing the levers, lift
it up by simply holding the rack sides, as soon as the
rack is stable in its upper position.
To restore to the lower position, press the levers A at
the sides of the rack and move the basket downwards.
We strongly recom-
mend that you do not
adjust the height of
the rack when it is
loaded.
NEVER raise or lower
the basket on one side
only.
FOLDABLE FLAPS WITH ADJUSTABLE POSITION
The side foldable flaps can be positioned at three dif-
ferent heights to optimize the arrangement of crock-
ery inside the rack.
Wine glasses can be placed safely in the foldable
flaps by inserting the stem of each glass into the cor-
responding slots.
For optimum drying results incline the foldable flaps
more. To change the inclination, pull up the foldable
flap, slide it slightly and position it as you wish.