Setup and user guide

14
GLASS CARE
Dedicated accessory that allows you to safely store
different types of stem glasses in the lower rack.
It enables cleaning & drying results by allowing an
optimised and stable positioning of the glasses.
2
3
1
1
3
2
A
B
Daily use
1. CHECK WATER CONNECTION
Check that the dishwasher is connected to the
water supply and that the top is open.
2.
SWITCH ON THE DISHWASHER
Open the door and press the ON/OFF button.
3.
LOAD THE RACKS
(see LOADING THE RACKS)
4.
FILLING THE DETERGENT DISPENSER
(see PROGRAMS TABLE).
5.
CHOOSE THE PROGRAM AND
CUSTOMISE THE CYCLE
Select the most appropriate program in accord-
ance with the type of crockery and its soiling lev-
el (see PROGRAMS DESCRIPTION) by
pressing the P button.
Select the desired options (see OPTIONS AND
FUNCTIONS).
6. START
Start the wash cycle by closing the door. When
the program starts you hear a beep.
7.
END OF WASH CYCLE
The end of the wash cycle is indicated by beeps
and by the flashing of the wash cycle number on
the display. Open the door and switch off the ap-
pliance by pressing the ON/OFF button.
Wait for a few minutes before removing the
crockery - to avoid burns.
Unload the racks, beginning with the lower one.
Dynamic Dry technology generates outstanding
drying results thanks to a condensation process that
occurs in the interior of the dishwasher. This
technology is working in all programs that have
drying phase - please refer to the Programs Table to
determine if the program you want to choose has
this phase or not.
The machine will switch off automatically during
certain extended periods of inactivity, in order to
minimise electricity consumption.
If the crockery is only lightly soiled or if it has
been rinsed with water before being placed in the
dishwasher, reduce the amount of detergent used
accordingly.
MODIFYING A RUNNING PROGRAM
If a wrong program was selected, it is possible to
change it, provided that it has only just begun: open
the door (be ware of HOT steam!), press and hold
the ON/OFF button, the machine will switch off.
Switch the machine back on using the ON/OFF but-
ton and select the new wash cycle and any desired
options; start the cycle by closing the door.
ADDING EXTRA CROCKERY
Without switching off the machine, open the door
(be ware of HOT steam!) and place the crockery in-
side the dishwasher. Close the door and the cycle
will begin from the point at which it was interrupted.
ACCIDENTAL INTERRUPTIONS
If the door is opened during the wash cycle, or if
there is a power cut, the cycle stops. It starts again
from the point at which it was interrupted once the
door has been closed or the electricity supply is re-
stored.