Operation Manual

14
How to use DynamicClean
DynamicClean uses special water jets to provide an intensive wash for shallow dishes and pans loaded
centrally to the DynamicClean area.
1. Adjust the DynamicClean area G folding down rear plate holders to load pots.
2. Load pots and casseroles inclined vertically in DynamicClean area. Pots have to be inclined towards the
power water jets.
G
Programming
The list of available programs and options can be found in program table on next page. To switch on the
appliance, press .
Press button to choose program in accordance with the level of soiling of the dishes and with
Program table. Information will be shown on the display:
When a program, additional options or Delay is chosen, press button and close the door within 3
seconds to start chosen program.
E1. Active additional options
E2. Selected program indication
E3. Short program description and program duration,
program progress
To cancel or change the program in progress:
- Press button for 3 seconds to cancel the program on running (water is drained for up to 1 minute,
then the appliance switches off).
- A short press of button will wake up the unit.
- Select a new program pressing button.
- Press the button and close the door.
To pause the program (e.g. if you want to insert an
item):
- Press button or open the door with caution (the
program pauses) and insert the items, (beware of HOT
steam!).
- Press button and close the door within 3 sec. to
restart the cycle (the program resumes the cycle from where
it was interrupted).
PAUSE
PRESS |>||