Operation Manual

19
6. Reset to factory default
P FACT DEF.
|>||OK
This function allows you to reset the appliance to the factory
settings. To use this function press button.
First setup wizard appears as a next step.
You need to set all parameters again including a choice of
language.
7. Exit
P EXIT
|>||OK
To exit menu press button. Press to come back to
the first step.
Maintenance and care
For hygienic reasons it is recommended to run a high-temperature cycle (e.g. Intensive) at least once per
month. It will help to keep the appliance clean, fully functional and avoid odours.
Cleaning the filters
Check filters and clean if necessary.
Unscrew microfilter (1),
remove it (2) and
remove fine sieve (3).
Rinse under running
water...
Insert Screw on microfilter
NOTE MARK!
Unscrew and
remove upper
arm.
Unscrew and remove
lower arm....
Clean spray nozzles
under running water
(use toothpicks if
necessary).
Insert and screw on upper and lower arms
tightly.
Cleaning the spray arms
3
4
1
2
5
CLICK!
6
1 6
2 5
3 8
4 7
3
4
1
2
5
6
1 6
2 5
3 8
4 7