Owner's Manual

6
USER INTERFACE CUSTOMER SETTINGS
Customer Settings
To enter the Customer Settings Menu, press and Hold the HI TEMP key (or “Options” key if there is no HI TEMP key) for 5 seconds,
then release. Press the START key within 2 seconds. The HI TEMP light will come on to indicate you are in the Customer Settings
Menu mode.
Customer Settings Menu
The Customer Settings Menu consists of a set of Features with Submenus under each of the features.
To scroll through the Features, press the NORMAL (or CYCLE) key.
To enter a Submenu, press the START Key. To scroll through the available submenu options, press the NORMAL (or CYCLE) key.
To exit the settings menu without making any changes, Press the CANCEL key AND hold for 3 seconds or wait 30 seconds without
doing anything.
The Menus and Submenus are either represented by numbers and characters in the display window (if present) or by LED light
patterns on the HMI (if no other display is present).
Menu
Display Text
(if display is
present)
LED Pattern (no display)
What this setting does
Default
Setting
SENSOR
POTS
AND PANS
NORMAL
Rinse Aid Level A X Adjust amount of rinse aid dispensed
A 0 X X X 0 mL - rinse aid off
A 1 X 1 mL X
A 2 X 2 mL
A 3 X X 3 mL
A 4 X 4 mL
A 5 X X 5 mL
A 6 X X 6 mL
Sound Level S X X Turn sound On and Off
S 1 X X
S 0 X
Light in Tub L X Turn the inner light on and off (if present)
L 1 X Light in Tub ON X
L 0 X Light in Tub OFF
Kosher Friendly
E X X
Turn Kosher Friendly mode ON and OFF
K 1 X Turn the mode ON
K 0 X Turn the mode OFF X
Factory Reset r X X X Factory Reset