Manual

Firsttrythesolutionssuggestedhere.Ifyouneedfurtherassistanceormorerecommendationsthatmayhelpyoutoavoidaservicecall,referto
thewarrantypageinthismanualandscanthecodewithyourmobiledevice,orvisithttps:llwww.kitchenaid.comlproduct_help.InCanada,visit
http://www.kitchenaid.ca
Contactusbymailwithanyquestionsorconcernsattheaddressbelow:
IntheU.S.A.: InCanada:
KitchenAidBrandHomeAppliances
CustomereXperienceCenter
553BensonRoad
BentonHarbor,MI49022-2692
Pleaseincludeadaytimephonenumberinyourcorrespondence.
KitchenAidBrandHomeAppliances
CustomereXperienceCentre
200-6750CenturyAve.
Mississauga,OntarioL5N0B7
The Clean light is Check the following:
flashing • Is the overfill protection float able to move up and down freely? Press down to release.
• Be sure the water supply is turned on to the dishwasher. (This is very important following the new installation of your
dishwasher.)
• Check for suds in the dishwasher. For more information on suds, see "Dishwasher does not clean completely."
Dishes do not dry NOTE: Plastic and items With nonstick surfaces are difficult to dry beCause theY havea poi0us surface, which tends to
completely €ollect water droplets_ Towe! drying may be necessary,
Use of rinse aid along with the Pr0gry TM opti0n is needed for proper drYing.
Pr0per loading of items can affect dryingl
• For imPi0ved resultsl place items on the moie slanted Side of the iaCk.
Glasses and Cups with €oncave b0tt0ms hold waterl This watei may spill 0nt0 0ther items when y0U aie unloading
dishwasher.
Unload the bottom rack first:
Spotting/Filming NOTES:
• Liquid rinse aid is necessary for drying and to reduce spotting.
• Use the correct amount of detergent.
Confirm that the cloudiness is removable by soaking the item in white vinegar for 5 minutes. If the cloudiness disappears, it
is due to hard water. Adjust the amount of detergent and rinse aid (see "Dishwasher Care" section). If it does not come
clear, it is due to etching.
Be sure the incoming water temperature is set at 120°F (49°C).
Try using the Hi-Temp Wash or Sani Rinse options.
To remove spotting, see "Dishwasher Care" section.
Dishwasher does Be sure the dishwasher is loaded correctly Improper loading can greatly decrease the washing performance (see the
not clean "Operating Your Dishwasher" section).
TM
completely Select the proper cycle for the type of soils. The ProWash or Tough cycle can be used for tougher loads.
Be sure the incoming water temperature is at least 120°F (49°C).
Use the proper amount of fresh detergent. More detergent is needed for heavier-soiled loads and hard water conditions.
Scrape food from dishes prior to loading (do not prerinse).
If foam or suds are detected by the dishwasher sensing system, the dishwasher may not operate properly or may not fill
with water.
Suds can come from:
• Using the incorrect type of detergent, such laundry detergent, hand soap, or dish detergent for hand washing dishes.
• Not replacing the rinse aid dispenser cap after filling (or refilling) the rinse aid.
• Using an excessive amount of dishwasher detergent.