Owner's Manual

SECURE DISHWASHER IN CABINET

OPENING

39. Double-check dishwasher alignment

in cabinet opening

Check that dishwasher is still level front to back and side-to-side

in the cabinet opening.

Open dishwasher door and place towel over pump assembly and

spray arm of dishwasher. This will keep screws from falling into

pump area when you are securing dishwasher to cabinet.

Open dishwasher door to prepare for securing the dishwasher

to the countertop or side cabinet.

NOTES:

■ The dishwasher must be secured to keep it from shifting when

the door is opened or closed.

■ Do not drop screws into bottom of dishwasher.

■ Locate brackets installed in the “Choose Anchor Attachment

Method” section, either on top or on the sides of the dishwasher.

■ If countertop anchoring: Secure dishwasher to the countertop

with two Phillips-head screws (included).

■ If side anchoring: Drill pilot holes in cabinet to avoid splitting

the wood. Secure dishwasher to cabinet with two Philips-head

screws (included). Remove upper rack for easier access. See

the Quick Start Guide for instructions on how to remove the

upper rack if needed.

41. Check door clearance

IMPORTANT: Check that top of door does not contact screws,

brackets, or countertop. If it does, adjust leveling legs or use the

side attachment option.

42. Check inner spacing

Open door and check that space between dishwasher cabinet

opening and tub is equal on both sides. If spacing is not equal,

loosen bracket screws and shift tub. Tighten bracket screws.

43. Direct Wire Connection

Screw to side

cabinet

40. Secure dishwasher

To complete direct wire connection. Complete Steps 18 to

24 in this installation guide.

Once complete, return here to Step 44 to complete Product

Installation.