Quick Start Guide
W11651305B
QUICK START GUIDE KITCHENAID
®
DISHWASHER
PRODUCT REGISTRATION & OWNER INFORMATION
Find your QR code on your
product's serial tag, as
shown in the diagram.
YOUR QR CODE UNLOCKS… product registration and warranty information, installation instructions, how-to videos,
and additional accessories to get the most out of your product. If you purchased a smart appliance, your QR code will
provide instructions on how to download the app and connect. You can access the full Installation, User Maintenance and
Operating Instructions, Warranty details, and more by visiting our website at www.kitchenaid.com/owners or
www.kitchenaid.ca/owners This may save you the cost of a service call. To receive a free printed copy of the
information online, call us at 1–800–422–1230 (U.S.A.) /1-800-807-6777 (Canada) or write to us at:
KitchenAid Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
KitchenAid Brand Home Appliances
Customer eXperience Center Unit
200-6750 Century Ave.
Mississauga,Ontario L5N 0B7
Register to access warranty information and receive important notifications related to your product. Scan the Photo
Registration Card or QR code to register your product.
WARNING: To reduce the risk of fire, electric shock, or injury to person, read the Important Safety Instructions located in
the Safety and Installation Instructions provided before installing or operating this appliance.
OPERATING INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the Installation, User Maintenance and Operating
Instructions printed and online before installing or operating this
appliance.
SANITATION
CYCLES
Sanitized Cycles sanitizes
dishes and glassware in
accordance with NSF
International NSF/ANSI
Standard 184 for Residential
Dishwashers. Certified
residential dishwashers are
not intended for licensed
food establishments. Only
sanitizing cycles have been
designed to meet the
requirements of the
NSF/ANSI 184 performance
standard for soil removal and
for sanitization efficacy.
There is no intention, either
directly or indirectly, that all
cycles on a NSF/ANSI 184
certified dishwasher meet the
NSF/ANSI 184 performance
standard for soil removal and
for sanitization efficacy.
1
Third Rack with
Wash Tubes
Third Level
Utensil Rack
Prepare and Load the
Dishwasher (12 Place Setting
Recommended Loading
Pattern)
2
Add Detergent and Rinse Aid (as needed)
to the Dishwasher.
OPTIONS
Hi Temp
Wash
Sani
Heat Dry
Rinse
Extended
2-4-8 Hr
Delay
5
Select Additional Options.
3
Check that All Arms Spin Freely (Items in
the rack can block the spray arms.)
Start
RESUME
Cancel
DRAIN
6
Start / Resume Cycle. Close the door within
4 seconds for top control models.
CYCLES
Tough
Normal
ProWash
Express
Wash
Rinse
Only
4
Select the desired Cycle for your load.
Additional Loading tips
NOTE: Not all cycles, options, and features
are available on all models. Appearance may
vary.
USER-MAINTENANCE INSTRUCTIONS
Filter Cleaning
The pump is protected from large objects
entering it by the foreign object cup in the
front and below the lower rack. The
maintenance free filter system does not
require any regular cleaning or maintenance.
If this cup fills up with particles or objects,
depress the tab in the center and pull up on
the cup to remove it. Dispose of the contents
and then replace the cup. To replace the cup,
put into the opening and push down to lock in
place.
WARNING
Tip Over Hazard
Do not use dishwasher until completely
installed.
Do not push down on open door.
Doing so can result in serious injury or cuts.