Instruction for Use

12
Installation dimensions
The hood must be installed in a cabinet having the characteristics indicated in the figure (Figure 12).
IMPORTANT: The hood is designed and approved for use exclusively with KitchenAid gas, electric,
vitroceramic, induction hobs.
For gas hobs, the total max. power is 16.2 kW.
If the hood is used with gas hobs, the downdraft hood must be installed exclusively with external
extraction (extractor version) and the burners must be equipped with safety valves.
If the hood is used with gas hobs, when the hood is in the "ON" position the extraction flow could
slightly modify the distribution of the flame on the pot. In particular, if extraction is set to max. levels
(power 3 or 4) make sure to privilege the non-frontal positions of the gas hob, for cooking with grills or
pans with large surface.
It is important to fix the box containing the electric devices in such way that potential gas leakage does
not compromise the safety of the appliance.
For hob installation, refer to the respective instruction manual.
IMPORTANT: A distance of at least 70 mm must be respected between the hob hole and the hood hole.
With installation of gas hobs, a distance of 100 mm between hood and hob is advisable.
Fig. 12
Place a removable partition and/or shelf in front of the hood body to allow assistance of authorised staff
should they need it.