Installation guide

Product dimendens
314/2" (80.0 cm) or
37-1/2" (95.3 cm} overall
18" overall
(47.7 cm)
(53.3 cm)
depth
2-7/8" (73 cm)
burner box height
2o7/8" (7.3 cm)
burner box height
Cutoutdimendons/reqeirements
rear of cabinet back edge
or rear wall of cutout
under
eounterto
@
RCS2002
Rcs2of2 L _=
series only
11/16"
/1.7 cm}
rain.
_=
See
NOTE'
for @
minimum
clearances.
Do not seal
cooktop to
countertop.
* Note: 24" (61 cm) rain. clearance if bottom
of wood or meta_ cabinet is protected by
not less than 1/4" (0.8 cm) flame retardant
mil_board covered with not less than No.
28 MSG sheet steel, 0.018" (0.04 era)
staiNess steel or 0.024"(0.00 cm}
alumninum or 0.020" (0.08 cm) copper.
30" (78.2 cm) rain. clearance between top
of cooking platform and bottom of
unprotected wood or metal cabinet.
Hlustration dimensions
@
21" 1-5/16"
(53.3 era) (3.4 cra)
38"
(76.2 era)
36"
(gl.4 era)
Q
18-5/8"
(33.7 cra)
28-7/8"
(73.3 cra)
35"
(89 cra)
O @
15-1/2" 21"
(34.4 cra) (53.3 cm)
18-5/8" 30"
(47.3 cra) (76.2 cm)
18-5/8" 36"
(47.3 cm) (91.4 cm)
t3" (33 cm)
Junction box, or
outlet =
U
12" (30.8 cm) rain.
from bottom of countertop.
10" (28.4 cm) from right side
of cabinet.
1" (2.8 cm) rain.
nearest left and right side
eombustiNe surface above
cooktop.
Important note on base cabinet construction: After making
the countertop cutout, some installations may require
notching down the base cabinet side walls to clear the
burner box. To avoid this modification, use a base cabinet
having side/vails wider than the cutout.
Note: if cabinet has a drawer, a 4" (10.2 cm) depth
clearance from the countertop to the top of the drawer
(or other obstruction) in base cabinet is required.