User Manual

ENGLISH

USING THE PRECISION KETTLE | 7

CHANGING THE FLOW CONTROL

USING THE PRECISION KETTLE

TIP: Prior to first use, fill the Precision Kettle with room temperature water and

pour at each flow control setting to become familiar with the different flow rates.

Your Precision Kettle has 3 flow

control settings. The flow control

lever inside the kettle is used to

change the settings.

Push the lever down for more

restricted flow; pull the lever up

for less restricted flow.

NOTE: After heating water, be sure to empty the Precision Kettle and allow it to cool

completely before changing the flow rate settings.

TIP: The flow control lever is meant to come out for cleaning. If you pull up too far

while changing the flow rate settings and the lever comes out, it can easily slide back

into place.

FILLING THE PRECISION KETTLE WITH WATER

Remove the lid from the Precision

Kettle and fill with water.

Replace the lid and put the Precision

Kettle back on the base.

NOTE: There must be a minimum of 1 cup (.25 L) of water for the Precision Kettle

to operate. Do not fill past the “Max” fill line of 1 quart (1 L).

W11165139A_ENv06.indd 7 1/5/18 11:39 AM