Manual

'oubleshooting
This section isdesigned to help you save the cost of a service call. It outlines possible
problems, their causes, and actions you can take to solve each problem. If you still need
assistance or service, call our Consumer Assistance Center (in the U.S.A., see page 59; in
Canada, see page 60) for help or calling for service. Please provide a detailed description of
the problem, your appliance's complete model and serial numbers, and the purchase or
installation date. (See the "A Note to You" section.) This information will help us respond
properly to your request.
PROBLEM
Nothing will
operate
The oven will
not operate
The surface
units will not
operate
POSSIBLE CAUSE
WHAT TO DO
The unit is not wired into
a live circuit with proper
voltage.
A household fuse has blown
or a circuit breaker has
tripped.
You have not set the elec-
tronic control correctly.
Wire the unit into a live circuit with
proper voltage. (See Installation
Instructions.)
Replace household fuse or reset
circuit breaker.
Refer to the section in this manual
describing the function you are
operating.
Wait for the start time to be reached
or cancel and reset the controls.
You have programmed a
delayed start time.
A household fuse has blown
or a circuit breaker has
tripped.
You have not set the control Push control knobs in before turning
knobs correctly, to a setting.
The control You are not pushing in Push control knob(s) in before
knob(s) will before turning, turning to a setting.
not turn
The Self- You have programmed a Wait for the start time to be reached
Cleaning delayed start time. or cancel and reset the controls.
cycle will not
operate
Replace household fuse or reset
circuit breaker.
56