manual

9
English
OPERATING THE ESPRESSO MACHINE
1
Make certain the steam dial is closed by
rotating it clockwise as far as possible.
2
Press and hold the On/Off power
button until the ON indicator lights up.
The dual boilers will begin heating, and
the Espresso and Hot Water functions
will begin to operate.
3
Place a coffee cup underneath the brew
head. Do not attach the portafilter to
the brew head.
4
Press the Espresso button to activate
the water pump and fill the brewing
boiler with water. After a few seconds,
water will flow from the brew head.
When the cup is full, press the
Espresso button again to stop the
water pump. The brewing boiler is
now ready for use.
5
Place the frothing pitcher under the
nozzle of the frothing arm.
6
Slowly open the Steam dial by turning it
counter-clockwise; press and hold the
Hot Water button to activate the water
pump and fill the frothing boiler. After
a few seconds, water will start flowing
from the nozzle.
Warming the boilers
ASSEMBLING THE ESPRESSO MACHINE
OPERATING THE ESPRESSO MACHINE