Owner's Manual

24
Select and confirm the instruction.
Empty the trays.
Fill the Water Tank to max fill line (2.2 L)
Place a sufficiently large container (≥ 0.5 L)
under the Dispenser outlet.
Follow the instructions on the Display up to
the end of the first phase.
1
NOTE: Do not interrupt the cleaning programs while they are running.
CARE AND CLEANING
BREW UNIT CLEANING - 2-PHASE BREW UNIT CLEANING PROCESS
For the second phase open the Service
Door on the right side of the housing
(gently pull the unlocking device inside the
handle upward, then carefully remove the
Service Door from the housing).
Unlock brewing unit (press red switch
upwards and rotate the handle up and to
the left until it locks).
2
Grasp handle and pull the brewing unit
straight out to remove. Clean the brewing
unit under cold, running water and then
let it dry. Put a brew unit specific cleaning
tablet inside the brew unit.
Please observe the manufacturer's
instructions of the cleaning tablet for usage.
Follow the instructions on the Display up to
the end of the program and confirm each
time.
The machine is ready for use again.
3
The brewing unit should be removed and cleaned under running water as needed and before
each cleaning program. Please do not use detergent, but only cold water.