Quick Start Guide

WIFI CONNECTIVITY
WIFI Connectivity and Remote Operation
Models are provided with a WIFI Antenna Module that allows the unit
to be remotely operated. The control is capable of monitoring and
performing remote operations once the remote enabling function
sequence is properly initiated at the appliance.
To connect your appliance:
1. Download the KitchenAid™ App from the Google Play
®
or
Apple App Store and create an account.
2. Locate the SAID Label using the diagram on the front of this Guide.
3. Set both the Mode and Temperature Knob to the WIFI mode.
4. Once the knobs are in position, press the pulsing Start Button.
5. When the WIFI Indicator Light to the left of the knob starts
blinking white, follow the steps in the app.
6. When the connection is complete the WIFI Indicator Light
will turn solid white.
7. To enable remote operations, turn on “Remote Control” in the app.
The Remote Indicator Light will turn solid white to signify remote
control commands can be sent to the range.
For more information on WIFI Connectivity,
visit www.kitchenaid.com/connect.
®/™ ©2020 KitchenAid. All rights reserved. All other trademarks are owned by their respective companies. D190462KCA
MODE KNOB TEMPERATURE KNOB
Bake Proof
Warm
Temperatures (225-500°F)
Broil Broil High
Broil Low
Convect Bake
Temperatures (225-500°F)
Convect Roast
Temperatures (225-500°F)
Convect Broil Broil High
Broil Low
Clean Clean
WIFI WIFI*
*See WIFI Connectivity Section
MODE AND TEMPERATURE
COMPATIBILITY TABLE
NOTE: When the unit is on, Mode can be changed
between Bake, Convect Bake, Convect Roast, and
Broil/Convect Broil. Press the Start Button to
confirm Mode change.
ACTION EXAMPLE
Invalid Mode/
Temperature
Combination Made
During a Cycle*
*Mode and Temperature
Compatibility Table
If the Temperature is changed during a cycle to
a selection that is invalid and the unit was in
a previous cycle, the unit will remain in the
previous cycle until corrected.
The Mode and Temperature Indicator Light
will blink to show an invalid selection has been
made and will continue to blink until corrected.
Mode is in Bake, Temperature is at 350°F
(177°C), Start Button is pressed and cycle
is running. Then Mode is moved to
Broil High. Unit will continue to Bake
at 350°F (177°C).
Changing Mode
Selection During
a Cycle
If the Mode or Temperature Knob is changed
during a cycle to a selection that is valid, the
Start Button will blink to indicate prompt for
action. Press the Start Button to begin new
setting selection.
If the Mode is moved from Bake to
Convect Bake, the Start Button will blink
as a prompt for action.
CHANGING MODE/TEMPERATURE DURING A CYCLE
*Appliance must be set to Remote Enable. Features subject to change. Compatible connected appliance required.
Details and privacy info at www.kitchenaid.com/connect.
W11114332B