Installation Instructions
Table Of Contents
- Range Safety
- Installation Requirements
- Installation Instructions
- Gas Conversions
- Sécurité de la cuisinière
- Exigences d’installation
- Instructions d’installation
- Déballage de la cuisinière
- Retirer la porte
- Installation de la bride antibasculement
- Raccordement au gaz
- Vérification de l’emplacement de la bride antibasculement
- Installer le plateau d’égouttement
- Système d’allumage électronique
- Ajustement de l’aplomb de la cuisinière
- Installer la plinthe
- Terminer l’installation
- Conversions pour changement de gaz
21
8. Apply masking tape to the end of a 1/4" (6.4 mm) nut driver to
help hold the gas orice spud in the nut driver while changing
it. Insert nut driver into the gas opening, and press down onto
the gas orice spud, then remove by turning the gas orice
spud counterclockwise and lifting out. Set gas orice spud
aside.
9. Propane gas orice spuds are stamped with a letter and a
number. Install the Number 105 oven bake burner orice
spud.
10. Place Natural gas orice in plastic parts bag for future use,
and keep with package containing literature.
11. Push down on the clip on the electrode bracket.
12. Replace oven bake burner electrode inside bracket.
13. Reinstall the oven bake burner and oven bake burner screws.
See Step 5 for illustration.
Replace Oven Bake Burner Cover
1. Align rear shoulder screw mounting holes (keyholes) on the
oven bake burner cover with shoulder screws in the bottom
of the oven.
2. Drop cover and slide to left or right to slide shoulder screws
into narrow ends of keyholes, and lock into place.
A
A. Propane gas orice spud
A
B
A. Oven bake burner electrode bracket
B. Electrode bracket clip
A
B
A. Oven bake burner electrode
B. Oven bake burner electrode bracket
B
A
A. Shoulder screw mounting holes (keyholes)
B. Shoulder screws
A
A. Bake burner cover