Installation Instructions
Table Of Contents
- Range Safety
- Installation Requirements
- Installation Instructions
- Gas Conversions
- Sécurité de la cuisinière
- Exigences d’installation
- Instructions d’installation
- Déballage de la cuisinière
- Retirer la porte
- Installation de la bride antibasculement
- Raccordement au gaz
- Vérification de l’emplacement de la bride antibasculement
- Installer le plateau d’égouttement
- Système d’allumage électronique
- Ajustement de l’aplomb de la cuisinière
- Installer la plinthe
- Terminer l’installation
- Conversions pour changement de gaz
18
6. Pull electrode out of bracket.
7. Apply masking tape to the end of a 1/4" (6.4 mm) nut driver to
help hold the gas orice spud in the nut driver while changing
it. Insert nut driver into the gas opening, and press down onto
the gas orice spud, then remove by turning the gas orice
spud counterclockwise and lifting out. Set gas orice spud
aside.
8. Propane gas orice spuds are stamped with a letter and a
number. Install the Number 125 oven bake burner orice
spud.
9. Place Natural gas orice in plastic parts bag for future use,
and keep with package containing literature.
10. Push down on the clip on the electrode bracket.
11. Replace oven bake burner electrode inside bracket.
12. Reinstall the oven bake burner and oven bake burner screws.
See Step 4 for illustration.
13. Replace oven bafe and oven bafe nuts. The front holes will
be aligned, and a click will sound when bafe is seated.
A
B
A. Grasp electrode here.
B. Bracket
A
A. Propane gas orice spud
A
B
A. Oven bake burner electrode bracket
B. Electrode bracket clip
A
B
A. Oven bake burner electrode
B. Oven bake burner electrode bracket