Installation Instructions
Table Of Contents
- Range Safety
- Installation Requirements
- Installation Instructions
- Gas Conversions
- Sécurité de la cuisinière
- Exigences d’installation
- Instructions d’installation
- Déballage de la cuisinière
- Retirer la porte
- Installation de la bride antibasculement
- Raccordement au gaz
- Vérification de l’emplacement de la bride antibasculement
- Installer le plateau d’égouttement
- Système d’allumage électronique
- Ajustement de l’aplomb de la cuisinière
- Installer la plinthe
- Terminer l’installation
- Conversions pour changement de gaz
25
Convert Oven Bake Burner (30" [76.2 cm] and 36"
[91.4 cm] models and the right oven cavity on 48"
[121.9 cm] models)
1. Slide the bake burner cover to the right or left.
2. Lift up and remove oven bake burner cover, and set aside.
3. Using a 1/4" (6.4 mm) nut driver, unscrew oven bafe nuts
and remove oven bafe. Set aside.
4. Remove the oven bake burner screws and oven bake burner.
Rotate burner 90° to the left, and gently lay on its side.
5. Lift up clip on the oven bake burner electrode bracket with a
nger or at-blade screwdriver, and pull away the electrode.
A
A. Bake burner cover
B
A
A. Oven bafe
B. Oven bafe nuts
A
B
D C
A. Oven bake burner screws
B. Oven bake burner
C. Oven bake burner electrode bracket
D. Oven bake burner electrode
A
B
A. Oven bake burner electrode bracket
B. Electrode bracket clip