Installation Instructions
28
Convert Oven Bake Burner (left oven cavity on
48" [121.9 cm] models)
1. Remove oven racks. See the “Remove Racks” section.
2. Remove the oven door. See the “Remove Oven Door”
section.
3. Slide the bake burner cover to the right or left.
4. Lift up and remove oven bake burner cover, and set aside.
5. Remove the oven bake burner screws and oven bake burner,
and gently set aside.
6. Lift clip up on the oven bake burner electrode bracket
withanger or at-blade screwdriver.
7. Pull electrode out of bracket.
8. Apply masking tape to the end of a 1/4" (6.4 mm) nut driver to
help hold the gas orice spud in the nut driver while changing
it. Insert nut driver into the gas opening, and press down onto
the gas orice spud, then remove by turning the propane gas
orice spud counterclockwise and lifting out. Set propane gas
orice spud aside.
9. Natural gas orice spuds are stamped with a letter and a
number. Install the Number 154 oven bake burner orice
spud.
10. Place Propane gas orice in plastic parts bag for future use,
and keep with package containing literature.
A
A. Bake burner cover
A
C
D
A
B
A. Oven bake burner
B. Oven bake burner screws
C. Oven bake burner electrode bracket
D. Oven bake burner electrode
A. Oven bake burner electrode bracket
B. Electrode bracket clip
A
B
A
B
A. Grasp electrode here.
B. Bracket
A
A. Propane gas orice spud