Installation Instructions
27
Replace Oven Bake Burner Cover
1. Align notches on the oven bake burner cover with shoulder
screws in the bottom of the oven.
2. Lower cover, and slide to left or right to slide shoulder screws
into the narrow ends of the notches, then lock intoplace.
A
A. Bake burner cover
Convert Oven Broil Burner (30" [76.2 cm] and
36" [91.4 cm] models and the right oven cavity on
48" [121.9 cm] models)
1. Using a 1/4" (6.4 mm) nut driver, remove broil burner screw.
Set aside with side igniter positioned on the right.
2. Pull the broil burner toward you until it slides out of the hole in
the oven back, and pull the electrode out of the bracket. The
broil burner will hang down in the back of the oven while you
change the orice.
3. Apply masking tape to the end of a 1/4" (6.4 mm) nut driver to
help hold the gas orice spud in the nut driver while changing
it. Insert nut driver into the gas opening, and press down onto
the gas orice spud, then remove by turning the Propane gas
orice spud counterclockwise and lifting out. Set Propane gas
orice spud aside.
4. Natural gas orice spuds are stamped with a letter and a
number. Install the Number 148 oven broil burner orice spud.
5. Place Propane gas orice in plastic parts bag for future use,
and keep with package containing literature.
6. Replace the broil burner in the hole in the oven back with the
broil burner assembly inside the broil burner electrode hole as
illustrated.
7. Reinstall the oven broil burner screw. See step 1 for
illustration. The screw is aligned with the hole when
aclicksounds.
B
A
B
A
A. Cover notches (4)
B. Shoulder screws (4)
B
A
C
A. Broil burner screw
B. Broil burner
C. Broil burner orice hole
A
B
A. Grasp electrode here
B. Bracket
Broil burner hanging
in back of oven
A
B
C
A. Oven back
B. Broil burner orice
C. Broil burner orice hole
A
B C
A. Broil burner orice hole
B. Broil burner electrode
C. Broil burner electrode hole