Owner's Manual
Table Of Contents
- RANGE SAFETY
- Range Safety
- RANGE MAINTENANCE AND CARE
- Self-Cleaning Cycle
- General Cleaning
- INSTALLATION INSTRUCTIONS
- REQUIREMENTS
- Tools and Parts
- Location Requirements
- Electrical Requirements (for Dual Fuel models) - U.S.A. Only
- Electrical Requirements (for Dual Fuel models) - Canada Only
- Electrical Requirements (for Gas models)
- Gas Supply Requirements
- INSTALLATION
- Unpack Range
- Install Anti-Tip Bracket
- Make Gas Connection
- Verify Anti-Tip Bracket Is Installed and Engaged
- Level Range
- Electronic Ignition System
- Complete Installation
- Remove Oven Doors
- Adjust Leveling Legs
- GAS CONVERSIONS
- Propane Gas Conversion
- Natural Gas Conversion
- Moving the Range
- SECURITE DE LA CUISINIERE
- Securite de la cuisiniere
- ENTRETIEN ET REPARATION DE LA CUISINIERE
- Programme d'autonettoyage
- Nettoyage general
- INSTRUCTIONS D'INSTALLATION
- SPECIFICATIONS
- Outils et pieces
- Exigences d'emplacement
- Specifications electriques (pour les modeles a double combustible) ± Etats-Unis seulement
- Specifications electriques (pour les modeles a double combustible) ± Canada seulement
- Specifications electriques (pour les modeles au gaz)
- Specifications de l'alimentation en gaz
- INSTALLATION
- Deballage de la cuisiniere
- Installation de la bride antibasculement
- Raccordement au gaz
- Verifier que la bride antibasculement est bien installee et engagee
- Reglage de l'aplomb de la cuisiniere
- Systeme d'allumage electronique
- Achever l'installation
- Retirer les portes du four
- Reglage des pieds de nivellement
- CONVERSIONS POUR CHANGEMENT DE GAZ
- Conversion pour l'alimentation au propane
- Conversion pour l'alimentation au gaz naturel
- Deplacement de la cuisiniere
- Blank Page
- Blank Page
- Blank Page
- Blank Page
- Blank Page
23
5. Unscrew wing nut and remove oven baffle.
A. Oven baffle
B. Wing nut
6. Remove the oven bake burner screw and set aside.
7. Gently set the bake burner to the side.
A. Igniter and wires
B. Bake burner screw
8. Unscrew and remove the cover over the orifice.
A. Orifice cover
9. Turn the Number 0.044 Propane gas orifice hood
counterclockwise to remove.
A. Number 0.044 Propane gas orifice hood
10. Install the Number 0.070 Natural gas orifice hood, turning it
clockwise 4 or 5 turns. Do not overtighten.
A. Number 0.070 Natural gas orifice hood
11. Position the oven bake burner over the orifice hood and
reinstall using screw.
A. Bake burner orifice hood
B. Oven bake burner
C. Oven bake burner screw
To Convert Upper Oven Bake Burner:
12. Repeat steps 1 through 8 above for conversion of the upper
oven bake burner.
13. Remove the Number 0.037 Propane gas orifice spud in the
upper oven and replace with a Number 0.055 Natural gas
orifice spud.
14. Reverse steps to reinstall the orifice covers, oven bake
burners, oven baffles and oven bake covers in both ovens.