Owner's Manual

TROUBLESHOOTING GUIDE

Problem Solution

If your Food Processor should

malfunction or fail to operate,

check the following:

Check to see if the Food Processor is securely plugged

into a grounded electrical outlet.

Make sure that the Bowl and Lid are properly aligned

and locked in place.

Have you pressed more than one button at the same

time?

Unplug the Food Processor, then plug it back into the

outlet.

Do you have the Large Pusher inserted to the Max Fill

Line?

Is the fuse in the circuit to the

Food Processor in working

order?

If you have a circuit breaker box, be sure the circuit is

closed.

The Food Processor may need

to cool to room temperature:

If the speed light turns off and the Off/Pulse light ﬂashes,

wait until the Off/Pulse light turns off and retry.

The Food Processor may take from 5-15 minutes to cool

completely.

The motor may be locked:

If the speed light stays on while the Off/Pulse light

ﬂashes, press the Off/Pulse button to reset the motor.

Food Processor not shredding

or slicing properly:

Make sure the raised-Blade side of the disc is positioned

face up on the Drive Adapter.

Make sure ingredients are suitable for slicing or

shredding.

Make sure the disc is positioned in the process position

(near the top of the Bowl), and not the storage position

(low and inside of the Bowl).

If the Work Bowl Cover won’t

close when using the disc:

Make sure the disc is installed correctly, and is positioned

properly on the Drive Adapter.

If the problem cannot be

corrected:

See the “Warranty and Service” sections.

Do not return the Food Processor to the retailer.

Retailers do not provide service.