User Guide

CMD + SHIFT CLICK TO CHANGE COPY
10
ASSEMBLING THE FOOD PROCESSORASSEMBLING THE FOOD PROCESSOR
Attaching the work bowl cover
NOTE: Be sure to install the desired accessory before attaching the work bowl cover.
1
Place the work bowl cover on the work
bowl with the feed tube just to the left
of the work bowl handle. Grasp the feed
tube and turn the cover to the right until
it locks into place.
2
Fit the food pusher into the 2-in-1
feed tube. See “Using the 2-in-1 feed
tube” for details on working with
different sized foods.
Installing the dicing kit
1
Place the dicing kit base inside the
work bowl.
2
Insert the dicing blade into the dicing
kit base.
3
Place the work bowl cover on the work
bowl with the feed tube just to the left
of the work bowl handle. Grasp the feed
tube and turn the cover to the right until
it locks into place.
4
After dicing, remove the work bowl
cover and dicing blade, then insert the
dicing kit clean out tool into the dicing
kit base, and fold down to push any
extra food through the grid.
W10694199A_FINAL2.indd 10 5/1/14 9:32 AM