Use and Care Manual

CMD + SHIFT CLICK TO CHANGE COPY

English

ASSEMBLING THE FOOD PROCESSORASSEMBLING THE FOOD PROCESSOR

Installing the adjustable slicing disc

Hold the slicing disc by the finger grips

and lower it onto the drive adapter.

Install the work bowl cover, being sure

it locks into place.

TIP: You may need to turn the disc/adapter until it drops down into place.

Adjusting the slicing thickness

Set the desired thickness by moving the lever

to the left for thinner slices and to the right

for thicker slices.

NOTE: The lever only works with

the externally adjustable slicing disc.

Changing thickness settings with other

discs or blades installed will have no

effect on operation.

Thicker

Thinner

Finger grip

Drive

adapter

Installing the reversible shredding disc

Hold the reversible shredding disc

by the 2 finger grips with the desired

shredding side facing UP. Insert the

disc adapter into the hole in the

bottom of the disc.

With the work bowl installed, slide the

drive adapter onto the power shaft.

TIP: You may need to turn the disc/adapter until it drops down into place.

W10694199A_FINAL2.indd 11 5/1/14 9:32 AM