Use and Care Manual

CMD + SHIFT CLICK TO CHANGE COPY CMD + SHIFT CLICK TO CHANGE COPY
9
English
PARTS AND FEATURES ASSEMBLING THE FOOD PROCESSOR
NOTE: Your Food Processor is shipped with the work bowl cover installed on the work
bowl, with the mini-bowl inside the work bowl.
Before rst use
Attaching the work bowl
1
Grasp the feed tube on the work bowl
cover and turn it clockwise to remove it
from the work bowl.
2
Lift out the mini-bowl.
1
Place the work bowl on the base,
aligning the raised portion with the
indentation on the base. The center hole
should fit over the power shaft.
Before using your Food Processor for the first time, wash all parts and accessories
either by hand or in the dishwasher (see “Cleaning the Food Processor” section).
Power Shaft
2
Grasp the work bowl handle and turn
the bowl counterclockwise to lock it
on the base.
IMPORTANT: Place the Food Processor on a dry, level countertop with the controls
facing forward. Do not plug in the Food Processor until it is completely assembled.
IMPORTANT: Your Food Processor will not operate unless the work bowl and work
bowl cover are properly locked on the base, and the large pusher is inserted to the
maximum fill line on the feed tube (approximately halfway down).
HELPFUL TIP: See the “Lid Interlock Instructions” for more information on the best
way to attach the work bowl and work bowl cover for best results.
W10694199A_FINAL2.indd 9 5/1/14 9:32 AM