Manual

_sing the Self-Cleaning Cycle
• Do not insert any object into the opening
of the protective shield that surrounds the
ignitor. Also, do not clean this area. Doing
either could result in product damage.
• Do not use your cooktop during the Self-
Cleaning cycle. Using your cooktop will
turn the cycle off.
Protective shield
around ignitor
Before setting the controls
• Make sure clock is set to correct
time of day.
• Make sure the oven door is
completely closed.
Setting the controls
To start cleaning immediately:
1. Press Clean pad.
A 31/2-hourSelf-Cleaning cycle will be set.
(The first 3 hours are for cleaning, the
last 30 minutes are for cooling.)
PRESS YOU SEE
(stop time display shows time
3',_hours later than time of day -
shown in start time display)
2. Set cleaning time (optional).
If you want a Self-Cleaning cycle
other than 31/2hours, press the
desired Number pads for the new
time up to 41/2hours.
• Use 21/2hours for light soil.
• Use 31/2-41/2hours for moderate
to heavy soil.
PRESS YOU SEE
(example shows 4-hour cleaning
cycle with stop time now 4 hours
later than time of day)
3. Start oven.
NOTE: The door will lock right after
you press START.
PRESS YOU SEE
(for first 30 minutes)
(for remainder of cycle)
continued on next page
55