Product Guide
Table Of Contents
- PARTS AND FEATURES_HB_PG_W11660645A
- PRODUCT SAFETY_HB_PG_W11660645A
- GETTING STARTED_HB_PG_W11660645A
- PRODUCT USAGE_HB_PG_W11660645A
- CARE AND CLEANING_HB_PG_W11660645A
- TROUBLESHOOTING_HB_PG_W11660645A
- Cordless_Warranty and Service_NAR_Common_One Year
- PIÈCES ET CARACTÉRISTIQUES_HB_PG_W11660645A
- SÉCURITÉ DU PRODUIT_HB_PG_W11660645A
- MISE EN PLACE_HB_PG_W11660645A
- UTILISATION DU PRODUIT_HB_PG_W11660645A
- ENTRETIEN ET NETTOYAGE_HB_PG_W11660645A
- TROUBLESHOOTING_HB_PG_W11660645A
- Sans fil_Garantie et Service_NAR_Standard_Un an
- PIEZAS Y FUNCIONES_HB_PG_W11660645A
- SEGURIDAD DEL PRODUCTO_HB_PG_W11660645A
- PROCEDIMIENTOS INICIALES_HB_PG_W11660645A
- USO DEL PRODUCTO_HB_PG_W11660645A
- CUIDADO Y LIMPIEZA_HB_PG_W11660645A
- SOLUCIÓN DE PROBLEMAS_HB_PG_W11660645A
- Inalámbrico_Garantía y Servicio_NAR_Común_Un año
8
5. After diagnostic is complete, the Battery will begin charging with a single LED flashing.
LEDs will become solid in color as charging progresses. When Battery is fully charged, all
LEDs will become solid and remain ON for 1 hour.
NOTE: If initial alternating light pattern continues for more than 10 seconds, the Battery may
be too warm or too cold to charge. Unplug Battery and allow it to stabilize to a normal room
temperature and try charging again. If Battery is still not charging after this, unplug Battery and
contact customer service.
BATTERY STATUS
LED INDICATION BATTERY LEVEL
○○○○ 75-100%
○○○� 50-75%
○○�� 25-50%
○��� < 25%
⛭���
When Battery has only 10% Battery level, 1 LED
start to flash at rate of 1 second ON / 1 second OFF
(0.5 Hz).
LED Legend Indication:
○ = ON
� = OFF
⛭ = FLASH
NOTE: When the Battery is installed or when the appliance is operated, the Battery charge
status LEDs will display for 5 seconds and then turn off. If the Battery charge is 10% or less,
the indication light will continue to flash until the unit is no longer in use or Battery is removed.
Full Charge: The Battery will be fully charged in around 3 hours.
NOTE: It is best to store the Cordless Hand Blender at room temperature.
PRODUCT USAGE
NOTE: Do not place the adapter in an area of extreme heat or cold. It will work best at normal
room temperature.
IMPORTANT: Make sure that the Variable Speed Controller is not pressed and the Battery is
removed before attaching or removing parts or accessories.