User Guide

16
DRYER USE
Starting Your Dryer
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
Follow these basic steps to start your dryer. Please refer to
specific sections of this manual for more detailed information.
1. Clean lint screen before each load. See “Cleaning the Lint
Screen.”
2. Place laundry into dryer and shut door.
3. Select either an Automatic or Manual cycle by pressing the
desired cycle button. The preset settings and drying time for
the chosen cycle will be displayed.
To use an Automatic Cycle
■ Select an Automatic Cycle.
■ Select DRYNESS LEVEL to adjust how dry you want the
load. As the cycle runs, the control senses the dryness of
the load and adjusts the time automatically for the
selected dryness level.
To make changes during an Automatic Cycle:
■ Press PAUSE/CANCEL once.
■ Adjust Dryness Level.
NOTE: Dryness Level selections can only be made while
using Automatic Cycles. Selecting More or Less
automatically adjusts the preset drying time needed.
To use a Manual Cycle
■ Select a Manual Cycle.
■ Press the plus (+) or minus (-) key until the desired drying
time is displayed. Press plus (+) or minus (-) and the time
will change by 1-minute intervals. Press and hold plus (+)
or minus (-) and the time will change by 5-minute intervals.
NOTE: The plus (+) or minus (-) features can be used only
with Manual Cycles.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in death,
explosion, or fire.
WARNING
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death
or fire.