Instruction for Use

The electrical connections must comply with current

legislation and be carried out by a qualified, competent

person.

• Information on the voltage and power absorbed are shown on the

serial no. plate.

• The appliance must be earthed.

• When installing the appliance, we recommend that this hob

is protected by a 3mm bi-polar switch.

• If damaged, the power cable must be replaced with an

identical type of powercable ( H05V2V2-FT90 ºC, or

H05RR-F type). We recommend that this operation be

conducted by our After Sales Service. Please contact our

Customer Care Centre on 00800-3810-4026.

• Do not use extension cables.

• The manufacturer declines all responsibility for damage to

persons, pets or goods as a result of failure to comply with

the regulations above.

Electrical connection

Earth

(yellow/green)

1. After cleaning the surfaces around the edges, fit the seal provided.

2. Position the hob inside the cut-out obeying all the hood and

cabinetry clearances on page 6.

3. Use the fixing pieces (A) provided, to secure the hob to the

worksurface, with screws.

Note: the electrical power cable must be long enough to allow

the hob to be lifted out from above.

Installation