Instruction for Use

6
YOUR SAFETY AND THAT OF OTHERS IS VERY
IMPORTANT
This manual and the appliance itself provide important safety messages,
to be read and always observed.
This is the danger symbol, regarding safety, warning of potential
risks to users and others.
All safety messages will be preceded by the danger symbol and
the following words:
Indicates a hazardous situation which, if
not avoided, will result in serious injury.
Indicates a hazardous situation which, if
not avoided, could cause serious injury.
All messages relevant to safety specify the potential risk to which they
refer and indicate how to reduce the risk of injury, damage and electric
shocks due to incorrect use of the appliance.
Make sure to comply with the following:
- The appliance must be disconnected from the power supply before
carrying out any installation operation.
- Installation and maintenance must be carried out by a specialised
technician, in compliance with the manufacturer’s instructions and
the local safety regulations in force. Do not repair or replace any part
of the appliance unless specifically stated in the user manual.
- The appliance must be earthed.
- The power cable must be long enough for connecting the appliance,
fitted in the cabinet, to the power supply.
- For installation to comply with the current safety regulations, an
omnipolar switch with minimum contact gap of 3mm is required.
- Do not use multi-sockets or extension cords.
- Do not pull the appliance’s power cable.
- The electrical parts must not be accessible to the user after
installation.
WARNING
DANGER
IMPORTANT SAFETY INSTRUCTIONS