Instruction for Use

will be sounded� In this case, you will need to repeat the operation�

If the error persists, contact the assistance service�

ADJUSTING THE POWER OF THE HOB

To switch the acoustic signal on/off:

• Switch on the cook top�

• Hold down the

control on the rst slider to the left, for 3 seconds.

Any alarms set will remain active�

3”

SWITCHING THE HOB ON/OFF

To turn the hob on, press the power button for around 1 second, until the cooking zone display lights up�

To turn the hob off, press the same button again, and all cooking zones will be deactivated�

If no function is selected, the hob will automatically switch off after 10 seconds�

If the hob is being used, switching it off will switch off all cooking zones, and the residual heat indicator,

“H”, will remain lit until all of the cooking zones have cooled�

POSITIONING

1. Locate the desired cooking zone, by referring to the position symbols at the bottom of each slide

touchscreen�

2. Place the pan in the chosen area, making sure that it covers one or more of the reference marks on

the surface of the hob�

3. Do not cover the control panel symbols with the cooking pot�

Please note: In the cooking zones close to the control panel, it is advisable to keep pots and pans inside

the markings (taking both the bottom of the pan and the upper edge into consideration, as this tends to

be larger)�

This prevents excessive overheating of the touchpad� When grilling or frying, please use the rear

cooking zones wherever possible�

ACTIVATING/DEACTIVATING COOKING ZONES AND ADJUSTING POWER LEVELS

O

To switch on a cooking zone:

1. Switch on the hob�

2. Set the required power level by sliding your nger across the slider control (SLIDER) for the cooking

zone of choice�

Daily use