Instructions for use
Installation diagrams 4 Important safety instructions 6 Safeguarding the environment 9 Declaration of conformity 9 Before use 9 Existing pots and pans 9 Recommended pot bottom widths 9 Installation 10 Electrical connection 10 Instructions for use 12 Cleaning 15 Troubleshooting guide 15 After-Sales Service 16 Power level table 16 Cooking table 17 3
Installation diagrams 180 mm 180 mm 300 mm / 190 mm 400 mm 380 373 mm Min. 5 cm Min. 10 cm Min. 5 mm Min. 3,8 cm Max.
Installation diagrams = = = = 5
These instructions shall also be available on website: www.kitchenaid.eu IMPORTANT SAFETY INSTRUCTIONS YOUR SAFETY AND THAT OF OTHERS IS VERY IMPORTANT This manual and the appliance itself provide important safety messages, to be read and always observed. This is the danger symbol, regarding safety, warning of potential risks to users and others.
- Do not use multi-sockets or extension cords. - Do not pull the appliance’s power cable. - The electrical parts must not be accessible to the user after installation. - The appliance is designed solely for domestic use for cooking food. No other use is permitted (e.g. heating rooms). The Manufacturer declines any liability for inappropriate use or incorrect setting of the controls. - The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements.
- Do not use steam cleaners. - Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. - After use, switch off the hob element by its control and do not rely on the pan detector. (only for appliances with glass surface). Disposal of household appliances - This product is built from recyclable or reusable materials. Disposal must be carried out in accordance with local regulations for waste disposal.
Safeguarding the environment Disposal of packing The packing material is 100% recyclable and marked with the recycling symbol . The various parts of the packing must not be dispersed in the environment, but disposed of in compliance with local regulations. The symbol on the appliance or the accompanying documentation indicates that this product should not be treated as domestic waste but must be taken to an appropriate collection point for recycling WEEE.
Installation After unpacking the product, check for any damage during transport. In case of problems, contact the dealer or the After-Sales Service. For built-in dimensions and installation instruction, see the pictures in page 5. min 5 mm PREPARING THE CABINET FOR FITTING WARNING - Install a separator panel under the hob. - The lower part of the product must not be accessible after installation. - Do not fit the separator panel if an undertop oven is installed.
Electrical connection Connection to the terminal block For the electrical connection, use an H05RR-F or H05V2V2-F cable as specified in the table below.
Instructions for use Control Panel Description To set the minuter counter To switch the single cooking zone OFF To select and activate the cooking zones To enable the hold function Hob ON/OFF To select one of the automatic function To lock the control panel Slide touch screen First use / after a power failure After connecting the hob to the electrical power supply, the control panel is locked (the indicator light above the key is ON).
Instructions for use The hob automatically switches off if no function is selected within 10 seconds of switching on. If you are using a pot that is not suitable, not correctly positioned or not of the correct dimensions for your induction hob, the message “no pot” will appear in the display (see figure on the left). If no pot is detected within 60 seconds, the hob switches off.
Instructions for use Simmering The simmering function automatically sets the selected cooking zone to a minimum boiling temperature. After positioning the pot, switch on the hob and select the chosen cooking zone. Press the key: “A” appears on the display and the indicator light turns on. To deactivate the function, simply press OFF on the slide touchscreen. Melting This function maintains a permanently low temperature in the cooking zone.
Cleaning WARNING - Do not use steam cleaners. - Before cleaning, make sure the cooking zones are switched off and that the residual heat indicator (“H”) is not displayed. IMPORTANT: Do not use abrasive sponges or scouring pads. Their use could eventually ruin the glass. • • • • After each use, clean the hob (when it is cool) to remove any deposits and stains due to food residuals. Sugar or foods with a high sugar content damage the hob and must be immediately removed.
After-Sales Service Before contacting the After-Sales Service 1. See if you can solve the problem yourself with the help of the “Troubleshooting guide”. 2. Switch the appliance off and then on again it to see if the problem has been eliminated. If the problem persists after the above checks, contact the nearest After-Sales Service.
Function Description of function Simmering Identifies a power level that is suitable for simmering long-cooking recipes. Suitable for cooking tomato sauce, ragu, soups, minestrone, maintaining a controlled cooking level (ideal for cooking in a bain-marie). Prevents food from boiling over or sticking to the bottom and burning, as often happens with these recipes.
Printed in Italy 03/15 400010769645 n GB