Instruction for Use

14
Press and hold the button for 3 seconds: A signal will sound and an indicator light will switch on
above the lock symbol to confirm that the function has been activated. The control panel is locked with
the exception of the OFF function. To unlock the controls, repeat the activation procedure. The dot will
go out and the hob will be reactivated.
IMPORTANT: Water, liquid spilled from pans or objects resting on the button below the symbol can
accidentally activate or deactivate the control panel lock.
Pause
This function allows you to temporarily pause and then resume cooking with the previous settings
(except for the SENSOR function and timer setting). Press the button: will starting flashing on
the display instead of the power settings. To resume cooking, press the button again.
Flexible zone
This function allows you to use two cooking zones as an extra-large single zone. It is perfect for oval,
rectangular and elongated pans (with maximum base dimensions of 40x18 cm). Switch on the hob and
press the button: The two cooking zone displays will show the setting "0". The two dots next to the
setting number will be lit, indicating that you have selected to merge the two cooking zones into a
single zone. To change the power setting, slide your finger along the touchscreen: The number inside
the circle will change simply by sliding your finger from a minimum of 1 to a maximum of 9. To
deactivate the flexible zone function, press the button: The two cooking zones will go back to
operating separately. Press OFF to switch off the cooking zone.
The booster power setting and SENSOR function cannot be used when the flexible zone function is
in use. If you are using the timer, the time will appear next to the display for the highest cooking zone.
Description of the automatic functions
The hob features automatic functions for each cooking zone. The symbols of the available functions
are shown next to the selection button for each cooking zone. When an automatic function is selected,
an indicator light will switch on next to the symbol and the letter "A" will appear in the cooking zone
display.
SENSOR
The SENSOR function automatically selects the ideal power setting for bringing water to the boil and
signals boiling point.
Place the pan containing water on the zone displaying the word SENSOR, then switch on the hob and
select the zone. Press the button: "A" will appear on the display and the indicator light will switch
on. An animation will be displayed in the area next to the zone as it heats up.
To ensure that the SENSOR function works correctly, we recommend that you:
- Only use water (at ambient temperature)
- Do not add salt, ingredients or seasoning before boiling point has been reached
- Do not change the zone’s power setting, or remove or move the pan
- Use pots and pans with a base diameter of no more than 1 cm larger or smaller than the outline
printed on the glass
- Fill the pan at least two thirds full (about 1 litre) and never to the brim (max. 5 litres for the 180 mm
zone and max. 7 litres for the 240 mm zone)
- Do not use pressure cookers.
Also follow the following recommendations for optimum results:
- Do not put the lid on a pan if it is being used with the SENSOR function
- Do not activate the SENSOR function if the zone is still hot (indicated by the letter "H" on the display).
A signal will sound once boiling point has been reached. The signal will sound three times at regular
intervals. After the second signal, a minute counter will automatically start counting the boiling time.
After the third signal, the hob will automatically select a lower power setting that is suitable for
maintaining the boil. You can now add your ingredients, set the timer or change the power setting.
i
i
Instructions for use