Instruction for Use

6
YOUR SAFETY AND THAT OF OTHERS IS VERY IMPORTANT
This manual and the appliance itself provide important safety
warnings which you should read and observe at all times.
This is the hazard symbol, which warns of potential safety risks
to users and others.
All safety information is preceded by the hazard symbol and
the following words:
Indicates a hazardous situation which, if
not avoided, will result in serious injury.
Indicates a hazardous situation which, if
not avoided, could cause serious injury.
All safety warnings specify the potential risk to which they refer and
indicate how to reduce the risk of injury, damage and electric shocks
caused by incorrect use of the appliance.
Observe the following instructions at all times:
- Wear protective gloves when unpacking and installing the
appliance.
- The appliance must be disconnected from the power supply before
installation.
- Installation and repairs must be carried out by a qualified
technician in compliance with the manufacturer’s instructions and
local safety regulations. Do not repair or replace any part of the
appliance unless specifically stated in the user manual.
- The appliance must be earthed.
- The power cable must be long enough to connect the appliance to
the mains power supply once fitted in its housing.
- For installation to comply with current safety regulations, an
omnipolar switch with a minimum contact gap of 3 mm is required.
- Do not use multi-socket adapters or extension leads.
- Do not pull on the appliance’s power supply cable.
WARNING
DANGER
IMPORTANT SAFETY INSTRUCTIONS
These instructions are also available at: docs.kitchenaid.eu