Product Guide
Table Of Contents
- PARTS AND FEATURES_HM_PG_W11660651A
- PRODUCT SAFETY_HM_OM_W11634658A
- CORDLESS_LI-ION BATTERY OPERATE PRODUCT DISPOSAL_NAR_OM/PG
- GETTING STARTED_HM_PG_W11660651A
- PRODUCT ASSEMBLY_HM_PG_W11660651A
- PRODUCT USAGE_HM_PG_W11660651A
- CARE AND CLEANING_HM_PG_W11660651A
- TROUBLESHOOTING GUIDE_HM_PG_W11660651A
- Cordless_Warranty and Service_NAR_Common_One Year
- PIÈCES ET CARACTÉRISTIQUES_HM_PG_W11660651A
- SÉCURITÉ DU PRODUIT_HM_OM_W11634658A
- MISE AU REBUT DU PRODUIT AVEC BATTERIE LI-ION_SANS FIL_NAR_OM/PG
- MISE EN PLACE_HM_PG_W11660651A
- UTILISATION DU PRODUIT_HM_PG_W11660651A
- DÉMONTAGE DU PRODUIT_HM_PG_W11660651A
- ENTRETIEN ET NETTOYAGE_HM_PG_W11660651A
- GUIDE DE DÉPANNAGE_HM_PG_W11660651A
- Sans fil_Garantie et service_NAR_Standard_Un an
- PARTS AND FEATURES_HM_PG_W11660651A
- PRODUCT SAFETY_HM_OM_W11634658A
- CORDLESS_LI-ION BATTERY OPERATE PRODUCT DISPOSAL_NAR_OM/PG
- GETTING STARTED_HM_PG_W11660651A
- PRODUCT ASSEMBLY_HM_PG_W11660651A
- PRODUCT USAGE_HM_PG_W11660651A
- CARE AND CLEANING_HM_PG_W11660651A
- TROUBLESHOOTING GUIDE_HM_PG_W11660651A
- Cordless_Warranty and Service_NAR_Common_One Year
EN
7
2.
Plug the adapter into a power source.
3. Turn the Battery upside down and slide the Battery onto the dock. Press down and the
latch will snap into place.
4. Upon initial plugging in the Battery into the charger, the Battery LEDs will alternate for a
few seconds as it performs a self-diagnostic of the Battery status.
5. After diagnostic is complete, the Battery will begin charging with a single LED flashing.
LEDs will become solid in color as charging progresses. When Battery is fully charged, all
LEDs will become solid and remain ON for 1 hour.
NOTE: If initial alternating light pattern continues for more than 10 seconds, the Battery may
be too warm or too cold to charge. Unplug Battery and allow it to stabilize to a normal room
temperature and try charging again. If Battery is still not charging after this, unplug Battery and
contact customer service.