Instructions for use
Installation diagrams 4 Important safety instructions 6 Safeguarding the environment 9 ECO design declaration 9 Before use 9 Existing pots and pans 9 Recommended pot bottom widths 9 Installation 10 Electrical connection 10 Instructions for use 11 After-Sales Service 16
Installation diagrams 160 mm 160 mm 4
Installation diagrams N.B. For the semi-flush mount version the 1.5 mm milling is not necessary.
These instructions shall also be available on website: www.kitchenaid.eu IMPORTANT SAFETY INSTRUCTIONS YOUR SAFETY AND THAT OF OTHERS IS VERY IMPORTANT This manual and the appliance itself provide important safety messages, to be read and always observed. This is the danger symbol, regarding safety, warning of potential risks to users and others.
- Do not use multi-sockets or extension cords. - Do not pull the appliance’s power cable. - The electrical parts must not be accessible to the user after installation. - The appliance is designed solely for domestic use for cooking food. No other use is permitted (e.g. heating rooms). The Manufacturer declines any liability for inappropriate use or incorrect setting of the controls. - The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements.
Danger of fire: do not store items on the cooking surfaces. - Do not use steam cleaners. - Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. - After use, switch off the hob element by its control and do not rely on the pan detector. (only for appliances with glass surface). Disposal of household appliances - This product is built from recyclable or reusable materials.
Safeguarding the environment Disposal of packing The packing material is 100% recyclable and marked with the recycling symbol . The various parts of the packing must not be dispersed in the environment, but disposed of in compliance with local regulations. The symbol on the appliance or the accompanying documentation indicates that this product should not be treated as domestic waste but must be taken to an appropriate collection point for recycling WEEE.
Installation After unpacking the product, check for any damage during transport. In case of problems, contact the dealer or the After-Sales Service. For built-in dimensions and installation instruction, see the pictures in page 5. PREPARING THE CABINET FOR FITTING WARNING - The lower part of the product must not be accessible after installation. - Do not fit the separator panel if an undertop oven is installed.
Electrical connection For direct connection to the network it is necessary to fit an omnipolar switch of a suitable size to ensure disconnection of he network with a contact opening distance that allows complete disconnection in the conditions of the overtension category III, compliant with the installation regulations (the yellow/green earth wire must not be interrupted). The omnipolar socket or switch must be easy to reach when the appliance is installed. N.B.
Instructions for use On/off of the Touch Control 6 7 8B 8. 3B 88 2 5 1. On/off 2. Child Safety (key lock) 3. Cooking area selection button (A-B) 4. Power increase 5. Power Decrease 6. Timer 7. Cooking point display 8. Timer Led (A-B) 7 8B 4 8. 1 3A The electronic Touch Control is activated by means of the ON/OFF button and switches from the OFF mode to the Standby mode. To do so it is necessary to press the ON/OFF button for 1 second. A short Beep will be heard.
Instructions for use Timer function The Timer function can be used as a timer for the cooking point or as an independent alarm clock. The two rear 7-segment displays (6) are also used for displaying the remaining time in minutes, until the timer alarm goes off. Timer selection The simultaneous activation of the “+” and “-” is used for selecting the timer function. There are two different timer modes: - Timer for the cooking point (the timer is assigned to a cooking point).
Instructions for use Control panel lock - BASIC Locking/activating Control panel lock: Pressing the Control panel lock button in standby or active mode locks the keypad; the stylized key symbol lights up. The control continues to operate in the previously set mode but can no longer be controlled by other buttons, except by the Control panel lock button or the ON/OFF button. Switching off with the ON/OFF button is also possible when locked.
Instructions for use Precautions If there is even the tiniest crack in the ceramic glass surface, immediately disconnect the hob from the electricity supply. - During operation, move any magnetic materials such as credit cards, computer disks, calculators, etc., away from the area. - Never use cooking foil or rest products wrapped in foil directly on the hob. - Metallic objects such as knives, forks, spoons and lids must not be rested on the surface of the hob to prevent them from heating up.
After-Sales Service Before contacting the After-Sales Service 1. Switch the appliance off and then on again it to see if the problem has been eliminated. If the problem persists after the above checks, contact the nearest After-Sales Service. Always specify: • a brief description of the fault; • the product type and exact model; • the Service number (the number after the word Service on the rating plate), located under the appliance (on the metal plate). • your full address; • your telephone number.
Whirlpool EMEA S.p.A. Via Carlo Pisacane n.1, 20016 Pero (MI), Italy www.whirlpool.