Manual

INSTALLATION INSTRUCTIONS
INTERIOR-MOUNTED VENT MOTOR
_A_ _ _T _1_ _ _ _'_'"__',_,_uY_ _,'_ _:_:t1_ ¸¸'_¸_¸'......_¸_'¢¸'¸'¸_¸t_¸
Determine which venting method is best for your application. Island Location
Vent system can terminate through either the wall or floor. Vent system installed under a concrete slab using Pro
Island location sewer pipe.
B
A
A. Down vent K
Built-in cabinet locations
.... II
C
I) I............
II II .....D
C.Left vent
D.Right vent
A. Down vent
B. Rear vent
........<ii::........
/ ii
C E
H
/
d I
A. Wall cap
B. 6" (15.2 cm) round metal vent
C. 16" (40.6 cm) maximum
D. 6" (15.2 cm) round PVC sewer pipe
E. 6" (15.2 cm) round metal vent
F. 6" (15.2 cm) round PVC coupling
G. Concrete slab
H. 6" (15.2 cm) round PVC sewer pipe
I. 6" (15.2 cm) round 90 ° PVC sewer pipe elbow
J. Tightly pack gravel or sand completely around pipe.
K. 6" (15.2 cm) round 90 ° PVC sewer pipe elbow
L. 6" (15.2 cm) round PVC coupling
M. 12" (30.5 cm) minimum
Calculating Vent System Length
It is recommended that you use round vent instead of rectangular
vent, especially if elbows are required. If rectangular vent is
required, it should be transitioned to 6" (15.2 cm) round vent as
soon as possible.
8