Installation Instructions

5
4. Mark the three mounting holes through the bottom duct onto
the cutout oor.
5. Using 7/64" (0.28 cm) drill, drill pilot holes into the three holes
marked in Step 4.
6. Realign and install the bottom duct with three short screws.
7. Using 7/64" (0.28 cm) drill, drill pilot holes through the four
mounting holes of the bottom duct ange into the bottom
front facing of the cutout/cabinet opening.
8. Align the spacer holes with the bottom duct holes and
proceeding with installation.
This step can be built in by using one of following trim kits.
Kit Size Kit Model Numbers/Color
27"(68.6cm) MTK1627PB/Black
30"(76.2cm) MTK1630PB/Black
27"(68.6cm) MTK2227PB/Black
30"(76.2cm) MTK2230PB/Black
Install the Microwave Oven
1. Gently return microwave oven to its upright position.
2. Position microwave oven near cutout opening.
C
A
B
D
A. Bottom duct mounting holes
B. 123# screws (3)
C. Bottom duct
D. Cabinet
A
B
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
A. Bottom duct ange
B. Mounting holes