Owner's Manual
Table Of Contents
- MICROWAVE OVEN SAFETY
- Microwave Oven Safety
- MICROWAVE OVEN MAINTENANCE AND CARE
- General Cleaning
- INSTALLATION INSTRUCTIONS
- REQUIREMENTS
- Tools and Parts
- Location Requirements
- Product Dimensions
- Installation Dimensions
- Electrical Requirements
- INSTALLATION
- Prepare Microwave Oven Hood Combination
- Installation Types
- Find the Cardboard Plate
- Find the Wall Stud(s)
- Find the Flush Point
- Mark Upper Cabinet
- Mark Rear Wall
- Drill holes in Upper Cabinet
- Drill holes in Rear Wall
- Attach Mounting Plate to Wall
- Rotate Blower Motor
- Install Damper Assembly
- Install the Microwave Oven
- Complete Installation
- VENTING DESIGN SPECIFICATIONS
- Venting Design Specifications
- SEGURIDAD DEL HORNO MICROONDAS
- Seguridad del horno de microondas
- MANTENIMIENTO Y CUIDADO DEL HORNO MICROONDAS
- Limpieza general
- INSTRUCCIONES DE INSTALACIÓN
- REQUISITOS
- Herramientas y piezas
- Requisitos de Ubicación
- Dimensiones del producto
- Dimensiones de instalación
- Requisitos eléctricos
- INSTALACIÓN
- Preparar la combinación de horno de microondas y campana
- Tipos de instalación
- Encontrar plantilla de cartón
- Encontrar las vigas de pared
- Encontrar el Punto al Ras
- Marcar gabinete superior
- Marque la pared posterior
- Taladrar los orificios en el gabinete superior
- Taladre orificios en la pared posterior
- Fije la placa de montaje a la pared
- Gire el Motor del Soplador
- Instale el Conjunto de la Compuerta
- Instalación del horno de microondas
- Complete la instalación
- ESPECIFICACIONES PARA EL DISEÑO DE LA VENTILACIÓN
- Especificaciones para el Diseño de la Ventilación
6
Spacer Spacer
(L*W*T: 40*10*1.6 mm)
8
B
B. Inside the Literature pack
Cardboard Plate
Upper cabinet template
and Wall template
1
C
C. Outer Form in the Carton
Literature Pack Literature 1
Check local codes. Check existing electrical supply. See “Electrical Requirements”.
It is recommended that all electrical connections be made by a licensed, qualified electrical installer.
NOTE:
� The hardware items listed here are for wood studs. For other types of wall structures, be sure to use appropriate fasteners.
� Be sure to purchase only Whirlpool factory-certified parts and accessories for your appliance. Your installation may require additional
parts. To order, see the “Online Ordering Information” section of the Quick Start Guide.
Location Requirements
Check the opening where the microwave oven will be installed.
The location must provide:
� Minimum installation dimensions. See the “Installation
Dimensions” illustration.
� Minimum one 2" x 4" (5.1 x 10.2 cm) wood wall stud and
minimum 3/8" (1 cm) thickness drywall or plaster/lath within
cabinet opening.
� Support for weight of 150 lbs (68 kg) which includes
microwave oven and items placed inside the microwave oven
and upper cabinet.
� Grounded electrical outlet inside upper cabinet. See the
“Electrical Requirements” section.
NOTE:
� Some models have a pocket handle. If installing the
microwave near a right side wall, make sure there is at least 3"
(7.6 cm) of clearance between wall and microwave oven so
you can grab the handle integrated inside the door.
� Some cabinet and building materials are not designed to
withstand the heat produced by the microwave oven for
cooking. Check with your builder or cabinet supplier to make
sure that the materials used will not discolor, delaminate, or
sustain other damages.
Special Requirements
For Wall Venting Installation Only:
� Cutout must be free of any obstructions so that the vent fit
properly and the damper blade opens freely and fully.
For Roof Venting Installation Only:
� If you are using a rectangular-to-round transition piece, the 3"
(7.6 cm) clearance needs to exist above the microwave oven
so that the damper blade can open freely and fully. See
“Rectangular to Round Transition” illustration in the “Venting
Design Specifications” section.
Product Dimensions
B
A
C
A. 29
7
/
8
" (76.1 cm)
B. 17
7
/
8
" (45.4 cm)
C. 12
1
/
8
" (31.3 cm)