Bump Out Kit Installation Instructions

INSTALLATION INSTRUCTIONS REQUIREMENTS

Tools and Parts

Tools Needed

■ Measuring tape

■ Pencil

■ Scissors

■ Masking tape or thumbtacks

■ Drill

■ No. 2 Phillips screwdriver

■ Stud nder

■ No. 3 Phillips screwdriver for 1/4 - 20 x 3" (76 mm) bolts

■ 3/16" (5 mm), 3/8" (10 mm), 5/8" (16 mm) drill bits

■ 3/4" (19 mm) hole saw

■ Keyhole saw

■ Diagonal wire cutting pliers

■ 7/16" (11 mm) socket wrench (or box wrench) for 1/4" x 2"

(6.4 mm x 51 mm) lag screws

■ 1

" (38 mm) diameter hole drill bit for wood or metal cabinet

■ Caulking gun and weatherproof caulking compounde

■ Duct tape

Materials Needed

■ Standard ttings for wall or roof venting. See the “Venting Design Specications” section.

Parts Needed (Provided in the Microwave Oven)

Part Drawing Description Quantity Where can nd?

Screw Pack

3/16 - 24 x 3" round-head bolts 2

1/4 - 20 x 3" at-head bolts 2

Washers 2

3/16" toggle nuts 2

1/4" x 2" lag screws 4

#6 x 3/8" Sheet metal screws 2

Power supply cord bushing 1

Damper Damper for wall or roof venting 1

Spacer Spacer (L*W*T: 40*10*1.6 mm) 16

B. Inside the Literature pack

A. Inner Foam in the cavity