Owner's Manual
Table Of Contents
- BUILT-IN MICROWAVE/OVEN COMBO SAFETY
- Built-In Microwave/Oven Combination Safety
- MICROWAVE OVEN MAINTENANCE AND CARE
- General Cleaning
- Self-Cleaning Cycle
- Steam Clean (on some models)
- INSTALLATION INSTRUCTIONS
- REQUIREMENTS
- Tools and Parts
- Location Requirements
- Electrical Requirements
- INSTALLATIONS
- Prepare Built-In Oven
- Remove Oven Door(s)
- Make Electrical Connection
- Install Oven
- Install Deflector Kit
- Replace Oven Door(s)
- Complete Installation
- SÉCURITÉ DE L’ENSEMBLE FOUR ÉLECTRIQUE/FOUR À MICRO-ONDES ENCASTRÉ
- Sécurité de l’ensemble four électrique/four à micro-ondes encastré
- ENTRETIEN ET RÉPARATION DU FOUR À MICRO-ONDES
- Nettoyage général
- Programme d’autonettoyage
- Steam Clean (nettoyage à la vapeur) (sur certains modèles)
- INSTRUCTIONS D’INSTALLATION
- SPÉCIFICATIONS
- Outils et pièces
- Exigences d’emplacement
- Spécifications électriques
- INSTALLATION
- Préparer le four encastré
- Enlever la/les porte(s) du four
- Raccordement électrique
- Installation du four
- Installation de l’ensemble de déflecteurs
- Réinstallation de la/des porte(s) du four
- Achever l’installation
- SEGURIDAD DE LA COMBINACIÓN DE HORNO MICROONDAS/HORNO INTEGRADO
- Seguridad de la combinación de horno microondas/horno integrado
- MICROWAVE OVEN MAINTENANCE AND CARE
- Limpieza general
- Ciclo de autolimpieza
- Steam Clean (Limpieza con vapor) (en algunos modelos)
- INSTRUCCIONES DE INSTALACIÓN
- REQUISITOS
- Herramientas y piezas
- Requisitos de ubicación
- Requisitos eléctricos
- INSTALACIONES
- Preparación del horno empotrado
- Retire las puertas del horno
- Hacer la conexión eléctrica
- Para instalar el horno
- Instale el kit de deflector
- Vuelva a colocar las puertas del horno
- Finalización de la instalación
9
Cabinet Dimensions — Built-in Microwave/Oven
Combination
Standard Installation
F
E
A
D
G
B
C
27" (68.6 cm) models
A. 27" (68.6 cm) minimum cabinet
width
B. 1
1
/
4
" (3.2 cm) top of cutout to
bottom of upper cabinet door
C. 19
1
/
4
" (48.9 cm) bottom of
cutout to floor is
recommended.
7.5"-19
1
/
4
" (19.1-48.9 cm)
bottom of cutout to floor is
acceptable.
D. 25
1
/
2
" minimum (64.8 cm)
cutout width
E. 1
1
/
2
" (3.8 cm) minimum bottom
of cutout to top of cabinet door
F. 41
5
/
16
" (105 cm)*
recommended cutout height
G. 24" (60.7 cm) cutout depth
30" (76.2 cm) models
A. 30" (76.2 cm) minimum cabinet
width
B. 1
1
/
4
" (3.2 cm) top of cutout to
bottom of upper cabinet door
C. 19
1
/
4
" (48.9 cm) bottom of
cutout to floor is
recommended.
7.5"-19
1
/
4
" (19.1-48.9 cm)
bottom of cutout to floor is
acceptable.
D. 28
1
/
2
" (72.4 cm) minimum
cutout width
E. 1
1
/
2
" (3.8 cm) minimum bottom
of cutout to top of cabinet door
F. 41
5
/
16
" (105 cm)*
recommended cutout height
G. 24" (60.7 cm) cutout depth
*NOTE: The cutout height can be between 41
1
/
8
" (104.5 cm) and
41
1
/
2
" (105.6 cm) for microwave/oven combination.
Flush Installation
A 25" (63.5 cm) minimum cutout depth is required.
These dimensions will result in a 1/4" (6 mm) reveal on the top, a
1/4" (6 mm) reveal on the sides, and a 1/8" (3 mm) reveal on the
bottom of the wall oven. Top and bottom gaps are not required for
installation.
The front face of the cleats and platform will be visible and should
be treated as a finished surface.
Front View Side View
A
B
C
D
E
F
F
I
H
H
J
G
G
27" (68.6 cm) models
A. 3/4" (1.9 cm) top cleat*
B. 27
1
/
4
" (69.2 cm) minimum
width of flush inset cutout
C. 25
7
/
8
" (65.7 cm) minimum
width of opening
D. 43" (109.2 cm) minimum height
of flush inset cutout
E. 42
1
/
2
" (107.3 cm)
recommended cutout height
F. 11/16" (1.7 cm) side cleat*
G. 1/4" (0.6 cm) recommended
with foot. 15/16" to 1
5
/
16
"
(2.3 cm to 3.5 cm) allowable
without foot.
H. Recommended junction box
location
I. 4
5
/
8
"-19
1
/
4
" (11.7-48.9 cm)
bottom of cutout to floor
J. 25" (63.5 cm) minimum depth
of cutout
30" (76.2 cm) models
A. 3/4" (1.9 cm) top cleat*
B. 30
1
/
4
" (76.8 cm) minimum
width of flush inset cutout
C. 28
7
/
8
" (73.3 cm) minimum
width of opening
D. 43" (109.2 cm) minimum height
of flush inset cutout
E. 42
1
/
2
" (107.3 cm)
recommended cutout height
F. 11/16" (1.7 cm) side cleat*
G. 1/4" (0.6 cm) recommended
with foot. 15/16" to 1
5
/
16
"
(2.3 cm to 3.5 cm) allowable
without foot.
H. Recommended junction box
location
I. 4
5
/
8
"-19
1
/
4
" (11.7-48.9 cm)
bottom of cutout to floor
J. 25" (63.5 cm) minimum depth
of cutout
*Cleats and spacers must be recessed 1
3
/
8
" (3.5 cm) from the
front of the cabinet.