Dimensions Guide
3
Built-In Microwave/Oven Combination
Location Requirements
IMPORTANT: Observe all governing codes and ordinances.
■ Cabinet opening dimensions that are shown must be used.
Given dimensions provide minimum clearance with oven.
■ Recessed installation area must provide complete enclosure
around the recessed portion of the oven.
■ Grounded electrical supply is required. See the “Electrical
Requirements” section.
■ Electrical supply junction box should be located 3" (7.6cm)
maximum below the support surface when the oven is
installed in a wall cabinet. A 1" (2.5 cm) minimum diameter
hole should have been drilled in the left rear corner of the
support surface to pass the appliance cable through to the
junction box.
■ Oven support surface must be solid, level and ush with
bottom of cabinet cutout. Floor must be able to support a
total weight (microwave and built-in oven) of 300 lbs (136 kg)
for 30" (76.2 cm) models.
IMPORTANT: To avoid damage to your cabinets, check
with your builder or cabinet supplier to make sure that the
materials used will not discolor, delaminate or sustain other
damage. This oven has been designed in accordance with
the requirements of UL and CSA International and complies
with the maximum allowable wood cabinet temperatures of
194°F (90°C).
Product Dimensions
30" (76.2 cm) Ovens
Cabinet Dimensions
30" (76.2 cm) Ovens
* NOTE: The cutout height can be between 41" and 41
1
/
2
"
(104.1 cm and 105.6 cm) for microwave/oven combination.
B
A
C
D
E
F
30" (76.2 cm) models
A. 42
9
/
16
" (108.0 cm) overall height
B. 28
7
/
16
" (72.2 cm) recessed width
C. 41" (104.1 cm) recessed height
D. 23
1
/
4
" (59.1 cm) max. recessed
depth
E. 30" (76.2 cm) overall width
F. 48" (121.9 cm) exible conduit
length measured from the
conduit clamp located at the
rear of the oven. Do not remove
the conduit clamp.
F
E
A
D
G
B
C
30" (76.2 cm) models
A. 30" (76.2 cm) min. cabinet width
B. 1" (2.5 cm) top of cutout to bottom
of upper cabinet door
C. 19
1
/
4
" (48.9 cm) bottom of cutout to
oor is recommended.
4"-19
1
/
4
" (10.2-48.9 cm) bottom of
cutout to oor is acceptable.
D 28
1
/
2
" (72.4 cm) cutout width
E. 1
1
/
2
" (3.8 cm) min. bottom of cutout
to top of cabinet door
F. 41
5
/
16
" (105 cm)* recommended
cutout height
G. 24" (60.7 cm) cutout depth