Owner's Manual
Table Of Contents
13
Install Oven
1. Using two or more people, lift oven partially into cabinet
cutout. Use the oven opening as an area to grip.
NOTE: Push against seal area of oven front frame when
pushing oven into cabinet. Do not push against outside edges.
2. Push against the seal area of the front frame to push the oven
into the cabinet until the back surface of the front frame
touches the front wall of the cabinet.
3. Push oven completely into cabinet and center oven into
cabinet cutout.
4. Securely fasten the oven to the cabinet using the
#8-14 x 3/4" screws provided.
Insert the screws through hole in black trim aligning with hole
in oven frame. Do not overtighten screws.
A. Oven frame
B. Side trim hole
C. Side trim piece
5. The bottom vent trim and bottom vent shield are shipped in
the foam packing at the top of the oven.
� Align vent tab (B) with oven frame (A) as shown.
� Using one #8-18 x 3/8" (9.5 mm) screw (C) on each side of
the shield tab (B), fasten the vent securely to the oven
frame (A).
A. Oven frame
B. Shield tab
C. #8-18 x 3/8" screws
A
B
C
C
B
A