Instructions

3
Deflector Bracket Dimensions
Cabinet Dimensions - Single Ovens, Flush Installations
A 25³⁄₈" (64.4 cm) minimum cutout depth is required.
These dimensions will result in a ¹⁄₄" (6 mm) reveal on the top, a
¹⁄₄" (6 mm) reveal on the sides, and a ¹⁄₈" (3 mm) reveal on the
bottom of the wall oven.
The front face of the cleats and platform will be visible and should
be treated as a finished surface.
Single Ovens Installed in Cabinet - Flush Installation
*Cleats and spacers must be recessed 1³⁄₈" (3.5 cm) from the
front of the cabinet.
Single Ovens Undercounter - Flush Installations
(without cooktop installed above)
*Cleats and spacers must be recessed 1³⁄₈" (3.5 cm) from the
front of the cabinet.
*Cleats and spacers must be recessed 1³⁄₈" (3.5 cm) from the
front of the cabinet.
27" (68.6 cm) Models
A. 26
¹⁵⁄₁₆ " (68.4 cm) overall width
30" (76.2 cm) Models
A. 29 ¹⁵⁄₁₆ " (76.0 cm) overall width
Front View Side View
27" (68.6 cm) Models
A.
³⁄₄ " (19 mm) top cleat*
B. 27
¹⁄₄ " (69.2 cm) minimum
width of flush inset cutout
C. 2
5⁷⁄₈ " (65.7 cm) minimum
width of opening
D. 29
¹⁄₄ " (74.3 cm) minimum
height of flush inset cutout
E. 28
¹⁄₂ " (72.4 cm) recommended
cutout height
F.
¹¹⁄₁₆ " (17 mm) side cleat*
G.
¹⁄₂ " x 2" (13 mm x 5.1cm)
spacer the entire depth of the
cutout*
H. Recommended junction box
location
I. 4
⁵⁄₈ " - 32" (11.7 - 81.3 cm)
bottom of cutout to floor
J. 2
5³⁄₈ " (64.4 cm) minimum
depth of cutout
30" (76.2 cm) Models
A.
³⁄₄ " (19 mm) top cleat*
B. 30
¹⁄₄ " (76.8 cm) minimum
width of flush inset cutout
C. 2
8⁷⁄₈ " (73.3 cm) minimum
width of opening
D. 29
¹⁄₄ " (74.3 cm) minimum
height of flush inset cutout
E. 28
¹⁄₂ " (72.4 cm)
recommended cutout height
F.
¹¹⁄₁₆ " (17 mm) side cleat*
G.
¹⁄₂ " x 2" (13 mm x 5.1cm)
spacer the entire depth of the
cutout*
H. Recommended junction box
location
I. 4
⁵⁄₈ " - 32" (11.7 - 81.3 cm)
bottom of cutout to floor
J. 2
5³⁄₈ " (64.4 cm) minimum
depth of cutout
A
A
B
C
D
E
F
F
I
H
H
J
G
G
Front View
27" (68.6 cm) Models
A. Recommended junction box
location
B.
³⁄₄ " (19 mm) top cleat*
C. 27
¹⁄₄ " (69.2 cm) minimum
width of flush inset cutout
D. 2
5⁷⁄₈ " (65.7 cm) minimum
width of opening
E. 29
¹⁄₄ " (74.3 cm) minimum
height of flush inset cutout
F. 2 8
¹⁄₂ " (72.4 cm)
recommended cutout height
G.
¹¹⁄₁₆ " (17 mm) side cleat*
H.
¹⁄₂ " x 2" (13 mm x 5.1 cm)
spacer the entire depth of the
cabinet*
I.4
⁵⁄₈ " (11.7 cm) bottom of cutout
to floor
30" (76.2 cm) Models
A. Recommended junction box
location
B.
³⁄₄ " (19 mm) top cleat*
C. 30
¹⁄₄ " (76.8 cm) minimum
width of flush inset cutout
D. 2
8⁷⁄₈ " (73.3 cm) minimum
width of opening
E. 29
¹⁄₄ " (74.3 cm) minimum
height of flush inset cutout
F. 2 8
¹⁄₂ " (72.4 cm)
recommended cutout height
G.
¹¹⁄₁₆ " (17 mm) side cleat*
H.
¹⁄₂ " x 2" (13 mm x 5.1 cm)
spacer the entire depth of the
cabinet*
I.4
⁵⁄₈ " (11.7 cm) bottom of cutout
to floor
Top View
27" (68.6 cm) Models
A.
¹⁄₂ " x 2" (13 mm x 5.1cm)
spacer the entire depth of the
cutout*
B.2 5³⁄₈ " (64.4 cm) depth of
cutout
C.1 ³⁄₈ " (3.5 cm) recess from
front of cabinet
D.
¹¹⁄₁₆ " (17 mm) side cleat*
30" (76.2 cm) Models
A.
¹⁄₂ " x 2" (13 mm x 5.1cm)
spacer the entire depth of the
cutout*
B.2 5³⁄₈ " (64.4 cm) depth of
cutout
C.1 ³⁄₈ " (3.5 cm) recess from
front of cabinet
D.
¹¹⁄₁₆ " (17 mm) side cleat*
A
A
B
C
D
E
F
G
G
I
H
H
B
D
D
C
A
A